OAHMP-VAHMR0054-24 / Unit #15158

Posting Date: 11/04/2026
Closing Date: 12/02/26

Location / Service Area: King George County, Virginia 

Brief Project Description / Summary of Work 

Bedroom  

Replace Window Air Conditioning Unit 

  • Remove the existing window air conditioning unit. 
  • Provide and install a new [window-mounted air conditioning/heating inverter unit] capable of providing both heating and cooling. 
  • Confirm the existing window measurements (approximately 26 inches wide) and verify compatibility with the selected unit prior to purchase and installation. 
  • Securely install and seal the unit to prevent air and water infiltration. 
  • Ensure the unit is properly functioning and that controls are accessible to the participant. 

 

Hallway Bathroom  

Replace Existing Toilet with Comfort-Height Toilet 

  • Remove and dispose of the existing toilet. 
  • Provide and install a new comfort-height toilet with an approximately 18-inch seat height. 
  • Ensure the toilet is securely installed, properly sealed, and functioning without leaks. 

Install Foldable Toilet Safety Armrests 

  • Provide and install foldable toilet safety armrests on the existing toilet location, compatible with the new comfort-height toilet. 
  • Ensure the armrests are securely attached and provide stable support during transfers. 
  • Verify that the armrests do not interfere with normal toilet use. 

Install Anti-Slip Flooring Strips 

  • Provide and install anti-slip flooring strips on the existing bathroom floor in the following locations: 
  • In front of the toilet. 
  • In front of the shower. 
  • In front of the sink. 
  • At the bathroom entrance. 
  • Thoroughly clean and prepare surfaces prior to installation to ensure proper adhesion. 
  • Use anti-slip strips suitable for the existing flooring material and bathroom environment. 

 

Living Room 

Replace Window Air Conditioning Unit 

  • Remove the existing window air conditioning unit. 
  • Provide and install a new [window-mounted air conditioning/heating inverter unit] capable of providing both heating and cooling. 
  • Confirm the existing window measurements (approximately 26 inches wide) and verify compatibility with the selected unit prior to purchase and installation. 
  • Securely install and seal the unit to prevent air and water infiltration. 
  • Ensure the unit is properly functioning and that controls are accessible to the participant. 

 

Front Exterior 

Replace Existing Mailbox with Accessible Mailbox 

  • Remove and dispose of the existing mailbox. 
  • Provide and install an accessible, dual-opening mailbox at the existing mailbox location. 
  • Ensure the mailbox is securely mounted and accessible for use. 

Install Reflective Address Numbers on and below Mailbox 

  • Provide and install reflective address numbers on both sides of the newly installed mailbox. 
  • Install additional reflective address numbers below the mailbox to replace worn out numbers. 
  • Ensure all numbers are securely attached and clearly visible. 

Install House Numbers 

  • Provide and install address numbers, approximately 6–9 inches tall, on the exterior of the home to the left of the front door. 
  • Position numbers where they are clearly visible from the driveway and roadway. 
  • Securely mount using exterior-rated materials and hardware. 

Install Yard Address Signage 

  • Provide and install yard address signage near the end of the driveway, adjacent to the road. 
  • Position signage to ensure the address numbers are clearly visible to approaching vehicles and emergency responders. 
  • Securely install signage using exterior-rated mounting materials suitable for outdoor exposure. 

 

Hallway  

Repair Existing Raised Threshold and Damaged Flooring 

  • Evaluate and repair/address the existing damaged, raised threshold and surrounding flooring in the hallway. 
  • Repair or replace damaged materials as necessary to eliminate the trip hazard. 
  • Create a smooth, stable, and secure transition between flooring surfaces, maintaining a flush or as close to flush transition as possible. 
  • Ensure all repaired flooring and threshold materials are securely installed and suitable for wheelchair use. 

 

Contractors interested in submitting a bid may contact the disAbility Resource Center to obtain the project address and schedule a time to visit the site. Site visits are by appointment only and must be coordinated in advance. Inquiries may be emailed to sdavis@cildrc.org. 

 

General Requirements 

  • Verify field conditions and exact quantities; request written approval for any substitutions.
  • Where specific product links are provided in the Scope of Work, contractors must use the exact products referenced in those links unless a written substitution is approved bydRC prior to purchase.
  • All grab bars/rails must support 350 lb+ when properly anchored; coordinate heights per OT input where available.
  • Protect adjacent finishes; clean up daily; provide 1-year workmanship warranty.
  • Work must comply with local building codes and aging-in-place best practices. For pre-1978 homes, EPA Lead-Safe Renovator certification and practices are required for interior work disturbing more than 2sq ft of painted surface.
  • Section 3 Compliance: This project is subject to the requirements of Section 3 of the Housing and Urban Development Act of 1968. Contractors and subcontractors are encouraged to make every effort to employ low-income persons and qualified Section 3 residents and to contract with Section 3 business concerns when feasible. Documentation of outreach and hiring efforts may be requested. 

 

How to Apply / Submit a Bid 

Due by the Closing Date:
• Completed bid/cost estimate with materials and labor itemized separately
• Proof of current Virginia contractor license
• Certificate of Insurance
• Lead-Safe and other certifications (if applicable)
• Completed W-9 

Submit Bids or Questions to:
Samantha Davis, CAPS
Program Manager – Older Adult Home Modification Program
disAbility Resource Center
409 Progress St., Fredericksburg, VA 22401
540-373-2559 • 📧 sdavis@cildrc.org 

 

Award Information 

All bids will be reviewed for completeness, qualifications, and compliance with HUD requirements. The contract will be awarded to the bidder whose proposal is determined to be most advantageous to the project, considering price, experience, capacity, and overall responsiveness. Contractors may be contacted for clarification before an award decision is made. Award notifications will be posted and emailed within ten (10) business days of the closing date. 

Recommended Posts

No comment yet, add your voice below!


Add a Comment

Your email address will not be published. Required fields are marked *